Yeastar Technology NeoGate TG100 Bedienungsanleitung PDF herunterladen (Seite 5)

NeoGate TB400 User Manual

www.yeastar.com 5

2. System set up

2.1 Installation of BRI Module.

Open the case of NeoGate, adjust the pins to the slots and insert then insert

the spins into the slots.

Note1: Please turn off the device when installing the modules.

2.2 Ethernet Line Connection

NeoGate provides two 10/100M Ethernet ports with RJ45 interface and LED

indicator. Plug Ethernet line into NeoGate’s Ethernet port, and then

connect the other end of the Ethernet line with a hub, switch, router, LAN or

WAN. Once connected, check the status of the LED indicator. The green LED

indicates the port is properly connected.

2.3 Power Supply Connection

NeoGate utilizes the high-performance switch power, which supply the

enough voltage and electrical energy that required by NeoGate system.

AC Input: 100~240V

DC Output: 12V,1A

Please follow the steps below to connect the NeoGate unit to a power outlet:

1. Connect the small end of the power cable to the power input port on the

NeoGate back panel, and plug the other end of the cable into a 100VAC

power outlet.

2. Check the Power LED on the front panel. A solid green LED indicates that

power is being supplied correctly.

1 2 3 4 5 6 7 8 9 10 ... 27 28

Keine Kommentare

Yeastar Technology NeoGate TG100 Bedienungsanleitung Seite 5